배터리 충전 안티 극성 연결 보드 이상적인 다이오드 배터리 충전 8A 공통 접지 [ZTA179-337]
  • 배터리 충전 안티 극성 연결 보드 이상적인 다이오드 배터리 충전 8A 공통 접지 [ZTA179-337]

배터리 충전 안티 극성 연결 보드 이상적인 다이오드 배터리 충전 8A 공통 접지 [ZTA179-337]

4.0 0리뷰
1,200
구매혜택:         적립 마일리지 : +1원 (상품 : 1원)
자체상품코드 ZTA179-337
브랜드:      OPENIDEA

수량:
1~2일 (재고 소진시 약 1주일 소요될 수 있습니다.)
총 상품금액(VAT 포함):   1,200
배송비:    3,000원 조건별배송 지역별추가배송비
택배
 / 
방문 수령지 : 인천광역시 미추홀구 주염로73번길 54 제이원플렉스 631호
추천 상품
  • 2,800원
  • 9,600원
  • 178,000원
  • 2,000원
  • 5,600원
  • 21,000원
  • 2,800원
  • 1,900원
  • 5,400원
인기 판매
  • 상품정보
  • 상품리뷰 (0)
  • 상품문의 (0)
  • 배송/반품/교환안내

Input voltage: dc3-30v, input voltage within this range

Output voltage: difference from input voltage, maximum 0.2V

Output current: 8a, Max, maximum peak current 12a

Dimensions: 24mm in length, 16mm in width and 18mm in height

Note: the battery needs to be connected to the reverse connection protection board first, and the polarity cannot be wrong. When the output of the board is connected to the normal battery polarity, the input is connected to the normal polarity for charging, and the input is connected to the wrong polarity for no charging.

Wiring diagram:

Diode is usually used as battery charging to prevent reverse power polarity protection, but its DC voltage drop is more than 0.5V, even up to 1V, which brings a lot of heat and reduces the efficiency of the power supply. This board uses low RDS (on) MOSFET, in the rated current range, the voltage drop is less than 0.2V, which is beneficial to improve the power efficiency, improve the reliability and safety of battery charging. When the output of the board is connected to the normal battery polarity, the input is connected to the right polarity to charge normally, and the input is connected to the wrong polarity to not charge.

상품리뷰

평점 제목 작성자 작성일
등록된 상품후기가 없습니다.

상품Q&A

번호 제목 작성자 작성일 진행상황

배송/반품/교환안내


 

 

이미지 확대보기 배터리 충전 안티 극성 연결 보드 이상적인 다이오드 배터리 충전 8A 공통 접지 [ZTA179-337]

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

비밀번호 인증

비밀번호를 입력해 주세요.

닫기